fbpx

Shed Spotlight – Julia and Chris’ Office and Playroom (Part 2 of 2)

Last week we looked at the beautiful shed that Chris and Julia built as a backyard office and play room for their kids to use when studying at home. In Part 1 we shared the lovely testimonial of how they found the whole process, and now here in Part 2 Chris is kindly following up our questions with some more details about the custom galvanised steel frame they put together for the foundation of the shed. If you haven’t read Part 1 yet, you can click here to read that first.

Let's take a look at a few photos from their building process...

Stage 1: Kitset Delivery

First things first, the delivery crane/Hiab truck brings the kitset from the shipping depot to the house. First they unload the kitset itself, (all wrapped up on the pallet with the doors and window strapped on top), then they unload the stack of foam insulation panels for the roof.

Stage 2: Subframe Construction

Chris decided to use a Galvanised Stratco PROBEAM 140 to build out the subframe for the shed, so we asked him how he found that part of the process, and what would he have done differently:

“The Stratco Pro-Beam was easy enough to work with. I ordered in 3m lengths and then cut down with an angle grinder with a steel cutting disc (Flexovit 125mm steel & stainless reinforced cut-off wheel). It was like cutting through butter. I used the same cutting discs to cut down the galvanised columns as well. The main reason I chose the steel subframe was the longer spans and less holes to dig! I ended up with nine posts in the end.  Just personal preference for steel over timber. Very happy with the end result, not the cheapest option but worth the peace of mind. To save time I could have ordered the steel pre-cut, but I wanted to measure against the base plate so ordered them as standard lengths.”

Fig. 3
Chris has laid the wooden base plates (which come with the kitset), on top of the steel frame so he can test if the frame he’s assembled is the right size.

Fig. 4
The steel frame has been moved into position and the 9 posts are now set into concrete.

Fig. 5
Now the rest of the steel beams are fixed in place, and the wooden base plates and joists from the kitset are laid over them in the opposite direction.

“The sub-frame cost $1,450.19 from Stratco including the delivery. I ordered standard 3m lengths which I cut down myself to achieve the nine-post design I wanted. The frame was set on posts that were concreted into the ground. All screwed together with 12 x 20mm Tek screws and a cordless drill. To save on cost I could have gone with a six-post design as the Pro-Beam will take the longer spans as well as have less cross beams.”

Any Questions? We'd love to help, talk to one of our shed consultants today: 1800 316 583

Stage 3: Building up the kitset cabin

Now that there’s a sturdy and level surface to build on, Chris and team can start assembling the walls of the kitset, and then finish with the roof boards and ashpalt tiles on top of the foam insulation panels.

Fig. 6
Seeing as the window hole is not pre-cut in the kitset, they choose where they want to place it, and after paying careful attention to the instructions included with the kitset, they can cut the appropriate wall boards to suit.

Fig. 7
Unlike the window, the doorway hole does come pre-cut in the kitset, so after building the walls up to an apropriate height, you can slip the door frame into place.

“The hardest parts of the build for us were the preparation of the site and digging the holes etc. We also needed a trench to connect the electrical/data/internet from the main house which delayed us. The actual studio itself was very straightforward when following the instruction folder that came with the kit. The instruction videos on-line were also very useful. “

Keep scrolling down the page to see how Julia and Chris painted their kitset studio...

What Custom Options did Chris & Julia add to their Star Cabin?

  1. They added our optional roof insulation kit which is a dense foam panel that gets installed on top of the roof boards but underneath the asphalt roof tiles.  
  2. A licensed electrician brought power from their house to the shed via a trench, which was also used to bring an internet cable over at the same time.
  3. White conduit was run up from under the floor to the added electrical outlets and also through the walls for the exterior lighting fixtures.
  4. For heating and cooling, they added an ActronAir 2.6kw Serene Series 2 Split-system air conditioning unit.

Any Questions? We'd love to help.

Talk to one of our shed consultants today: 1800 316 583

Stage 4: Painting & Decorating

The painting took us longer than we expected but we did 3 coats inside and out!

The exterior trim and the interior of the shed were all painted with Dulux Lexicon Half, and the exterior was painted with Dulux Stepney. The solid wood floorboards that come with the kitset were sealed with Cabot’s Clear CFP Floor Waterbased.

Stage 5: Finishing Touches

Notice how the thin wooden cross bars on the doors and windows can be removed, which allows for easy cleaning of the window glass, as well as easier painting during installation.

Follow up: What could we have done differently?

We also asked Julia & Chris about what we at SheShed could have done differently to make their experience easier:

“A video on the roof insulation would be handy but not too difficult to work out in the end. The painting took us longer than we expected but we did 3 coats inside and out! Possibly a pre-painted finish as an option for the door and windows in a classic white could be the way to go.”

We’re pleased to add that we have better installation info for our roof insulation kits under development, and are looking forward to growing further as a company so we can offer additional options in the future like pre-painted components!

We’re also super thankful to great customers like Chris and Julia for taking the time to send us these great photos of their build process and answer all our questions about how it went for them. Thanks guys!

Which She Shed would you build?

We have different shed sizes available from just a 5 square meter garden shed, right up to 29 square meters for a luxury sleepout. Call us today to talk with one of our shed consultants, and we’ll help figure out the best option for you.

Call us today: 1800 316 583

Menu